Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show ip tunnel-route

    Syntax

    show ip tunnel-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ]
    [ all ] [ protocol ] [ filter ]

    Release Information

    Command introduced in JunosE Release 7.1.0.

    Description

    Displays current state of the IPv4 tunnel routing table.

    Options

    • vrfName—Contents of the IPv4 tunnel routing table associated with a VRF
    • destination—IP address or domain name of the host to show
    • ipMask—IP mask of the specific address to show
    • detail—Displays detailed information about the specific prefix
    • all—Displays all routes in the IPv4 tunnel routing table inserted from all protocols, not just the best routes
    • protocol—One of the following protocols for which you want to display the best route or all routes in the tunnel routing table; no routes are displayed if routes for the specified protocol are not present in the tunnel routing table

      Note: Other protocol options are available in the CLI, but they are not applicable to the tunnel routing table.

      • bgp-tunnel—Displays the BGP tunnel routes in the tunnel routing table
      • ldp—Displays the LDP tunnel routes in the tunnel routing table
      • rsvp—Displays the RSVP tunnel routes in the tunnel routing table
    • filter—See Filtering show Commands

    Mode

    Privileged Exec, User Exec

    Published: 2014-08-18