Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show ip bgp neighbors received-routes

    Syntax

    show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
    l2vpn all | route-target signaling ]
    neighbors { ipAddress | ipv6Address } received-routes
    [ fields fieldOptions ] [ delta ] [ filter ]

    Release Information

    Command introduced before JunosE Release 7.1.0.
    l2vpn and all keywords added in JunosE Release 7.1.0.
    ipv6Address variable added in JunosE Release 8.0.0.
    route-target signaling keywords added in JunosE Release 8.2.0.

    Description

    Displays routes originating from the specified BGP neighbor before inbound policy is applied.

    Options

    • ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the default option
    • ipv4 multicast—Specifies the IPv4 multicast address family and routing table
    • vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and forwarding instances
    • vpvn4 vrf vrfName—Specifies the IPv4 VPN address family and only the IPv4 VPN routing and forwarding instance with the name vrfName
    • l2vpn—Displays information for only the L2VPN address family
    • all—Optional keyword; has no effect
    • route-target signaling—Displays information for only the route-target address family
    • ipAddress—IP address of a neighbor whose routes the router has learned
    • ipv6Address—IPv6 address of a neighbor whose routes the router has learned
    • fields—Displays only the specified fields; the display order of the fields is hard-coded and not affected by the order in which you enter them
    • fieldOptions—Fields to be displayed, in the format
      all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities | extended-communities | imported | intro | in-label | loc-pref | med | next-hop | next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi | stale | unknown-types | weight ]*
      • all—All available information; not recommended, because this information for each network does not fit on a single line and is difficult to read
      • afi—Address family identifier
      • aggregator—AS number and IP address of aggregator
      • as-path—AS path through which this route bas been advertised
      • atomic-aggregate—Whether the atomic aggregate attribute is present
      • best—Whether this is the best route for the prefix
      • clusters—List of cluster IDs through which the route has been advertised
      • communities—Community number associated with the route
      • extended-communities—Extended community
      • imported—Whether the route was imported
      • intro—Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword
      • in-label—MPLS label for the route; the label received with incoming MPLS frames; typically, but not always, this is the label advertised to MP-BGP peers
      • loc-pref—Local preference for the route
      • med—Multiexit discriminator for the route
      • next-hop—IP address of the next router that is used when forwarding a packet to the destination network
      • next-hop-cost—Whether the indirect next hop of the route is unreachable, if not, displays IGP cost to the indirect next hop
      • origin—Origin of the route
      • originator-id—Router ID of the router in the local AS that originated the route
      • out-label—MPLS label for the route; the label sent with outgoing MPLS frames; also the label received from MP-BGP peer; typically, but not always, this is the label received from MP-BGP peers
      • peer—IP address of BGP peer from which route was learned
      • peer-type—Type of BGP peer: internal, external, or confederation
      • rd—Route distinguisher
      • safi—Subsequent address family identifier
      • stale—Route that has gone stale due to peer restart
      • unknown-types—Attribute codes for unknown path attributes
      • weight—Weight of the route
      • *—Indicates that one or more parameters can be repeated multiple times in a list in the command line
    • delta—Displays baselined statistics
    • filter—See Filtering show Commands

    Mode

    Privileged Exec, User Exec

    Published: 2014-08-18