Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
show hdlc interface
Syntax
show hdlc interface [ { dataRestriction [ dataRestriction ]* } | full ]
[ delta ] [ stateRestriction ] [ { interfaceType } interfaceSpecifier ] [ filter ]
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Displays statistics about specified Cisco HDLC interfaces.
Options
- dataRestriction—Specify one
or more of the following keywords:
- config—Displays information about the HDLC interface configuration
- status—Displays information about the HDLC interface operational status
- statistics—Displays information about the HDLC interface statistics
- *—Indicates that one or more parameters can be repeated multiple times in a list in the command line
- full—Displays configuration, status, and statistics information; equivalent to specifying config status statistics
- delta—Displays baselined statistics
- stateRestriction—Specify only
one of the following keywords:
- open—Displays an interface that is administratively enabled, which means that the no ppp shutdown command is operational
- closed—Displays an interface that is administratively disabled, which means that the ppp shutdown command is operational
- up—Displays an interface that is up, which means that the LCP has been negotiated
- down—Displays an interface that is down, which means that the LCP has not been negotiated, the negotiations have failed, or the connection has been terminated
- lower-layer-down—Displays an interface that is not up and is waiting for the lower layer to come up to initiate negotiations for LCP
- not present—Displays an interface on which traffic cannot flow because hardware is unavailable
- interfaceType—Interface type; see Interface Types and Specifiers
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
- filter—See Filtering show Commands
Mode
Privileged Exec, User Exec
