Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
show gre tunnel
Syntax
show gre tunnel [ detail ] [ state tunnelStatus ]
[ tunnelName | [ virtual-router vrName ] ip ipAddress ] [ filter ] [ summary ]
To display summary information:
show gre tunnel summary [ filter ]
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Displays information about GRE tunnels.
Options
- detail—Shows detailed tunnel information about GRE tunnels
- tunnelStatus—State of tunnels
for which information is displayed; one of the following:
- disabled—Tunnel is disabled
- down—Tunnel is not operational
- enabled—Tunnel is enabled
- lower-down—Interface layer lower below the tunnel is not operational
- not-present—Tunnel service module is not in slot
- up—Tunnel is operational
- tunnelName—Name of a tunnel for which you want to display information
- vrName—Name of a virtual router for which tunnel information is displayed
- ipAddress—IP address associated with tunnel
- filter—See Filtering show Commands
- summary—Displays summary information
Mode
Privileged Exec
