Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    set-overload-bit

    Syntax

    [ no ] set-overload-bit [ on-startup seconds | on-startup wait-for-bgp
    [ bgpSeconds ] ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Sets the overload bit, indicating to other IS-IS routers not to use this router as an intermediate hop in their SPF calculations. The no version restores the default value, clearing the overload bit.

    Options

    • on-startup—Sets the overload bit only after a system reload; prevents other routers from routing through this router before it is fully operational
    • seconds—Period after the reload during which the overload bit is set, in the range 5–86400 seconds; the overload bit is cleared when the period expires
    • wait-for-bgp—Specifies that the overload bit is not cleared until BGP has completed convergence
    • bgpSeconds—Maximum period to wait for BGP to converge, in the range 5–86400 seconds with a default value of 600 seconds; the overload bit is cleared when the period expires

    Mode

    Router Configuration

     

    Related Documentation

     

    Published: 2014-08-18