Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    set metric

    Syntax

    set metric [ +relValue | -relValue | absValue ]

    no set metric

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Modifies the metric value (for BGP, the MED) for a route that matches the route map by applying a relative or absolute metric. The no version removes the set clause from a route map.

    Note: You cannot have an absolute and a relative metric within the same route map sequence. Issuing either command overrides any previously configured metric in the route map.

    Options

    • +—Specifies that the value is added to the metric for routes matching the route map; immediately precedes the metric value with no intervening space
    • –—Specifies that the value is subtracted from the metric for routes matching the route map; immediately precedes the metric value with no intervening space
    • relValue—Number, in the range 0–4294967295
    • absValue—Number, in the range 0–4294967295

    Mode

    Route Map Configuration

    Published: 2014-08-18