Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All



    For OSPF:

    [ no ] remote-neighbor ipAddress area { areaId | areaIdInt }

    For PIM:

    [ no ] remote-neighbor [ ipAddress | ipv6Address ] sparse-mode

    For RIP:

    [ no ] remote-neighbor ipAddress

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Configures an OSPF, PIM, or RIP remote neighbor. The no version removes the remote neighbor and any attributes configured for the neighbor.

    Note: For PIM, this command is typically used when you configure PIM remote neighbors to run multicast services over BGP/MPLS VPNs. That functionality is no longer supported.


    • ipAddress—IPv4 address identifying the remote neighbor
    • areaId—OSPF area ID in IP address format
    • areaIdInt—OSPF area ID as a decimal value, in the range 0–4294967295
    • ipv6Address—IPv6 address identifying the remote neighbor


    Router Configuration

    Published: 2014-08-18