Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    radius dsl-port-type

    Syntax

    radius dsl-port-type { sdsl | adsl-cap | adsl-dmt | idsl | xdsl | virtual }

    no radius dsl-port-type

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Sets RADIUS attribute 61, NAS-Port-Type, in RADIUS access request packets and accounting start and stop packets for ATM interfaces. The no version restores the default setting, xdsl.

    Note:

    • If the interface (port) is Ethernet, then it sets the attribute to Ethernet and disregards the parameter set with this command. If the interface (port) is DSL, then the attribute can have any value listed in the command and uses the value configured.
    • For subscribers connected over the LAG interface in DHCP standalone authenticate mode, RADIUS calculates the value of the Nas-Port-Type attribute.

    Options

    • sdsl—Symmetric DSL
    • adsl-cap—Asymmetric DSL, carrierless amplitude phase modulation
    • adsl-dmt—Asymmetric DSL, discrete multitone
    • idsl—ISDN DSL
    • xdsl—DSL of unspecified type (default)
    • virtual—Virtual

    Mode

    Global Configuration

    Published: 2014-08-18