Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds3 t1 timeslots

    Syntax

    path pathChannel ds3 ds3Channel t1 t1Channel/subchannel timeslots range
    [ speed { 56 | 64 } ]

    no path pathChannel ds3 ds3Channel t1 t1Channel/subchannel

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Assigns a range of DS0 timeslots to a subchannel as a single data stream for a T1 channel on a DS3 signal. This command applies to a T1 channel on a DS3 over channelized SONET interface. You can optionally specify a line speed that applies to all DS0 timeslots assigned to a subchannel. The no version deletes the fractional T1 circuit.

    Options

    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
    • t1Channel—Number, in the range 1–28, that identifies the T1 channel
    • subchannel—Fractional T1 interface, in the range 1–24
    • range—Timeslots assigned to the T1 channel in the range 1–24; a dash represents a range of timeslots, and a comma separates timeslots. For example, 1-10, 15-18 assigns timeslots 1–10 and 15–18.
    • speed—Specifies the data rate for the T1 channel, either 56 Kbps or 64 Kbps; default value is 64 Kbps

    Mode

    Controller Configuration

    Published: 2014-08-18