Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
path ds3 t1 fdl
Syntax
path pathChannel ds3 ds3Channel t1 t1Channel fdl { ansi | att | all | none }
no path pathChannel ds3 ds3Channel t1 t1Channel fdl [ ansi | att | all ]
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Specifies the facilities data link (FDL) standard for a T1 channel on a DS3 signal. This command applies to a T1 channel on a DS3 over channelized SONET interface. The no version restores the default, none.
Options
- pathChannel—Number, in the range 1–2147483648, that identifies the path
- ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
- t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27
- ansi—Specifies ANSI T1.403 Standard for extended superframe FDL exchange support
- att—Specifies AT&T Technical Reference 54016 for extended superframe FDL exchange support
- all—Specifies both the AT&T and ANSI mode for extended superframe FDL exchange support
- none—Removes the current FDL mode settings
Mode
Controller Configuration
