Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds3 t1 fdl carrier


    [ no ] path pathChannel ds3 ds3Channel t1 t1Channel fdl carrier

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Specifies that a T1 channel on a DS3 signal is used in the carrier environment. This command applies to a T1 channel on a DS3 over channelized SONET interface. The no version restores the default situation, in which an interface does not operate in the carrier environment.


    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
    • t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination of individual channels and ranges, in the range 1–28 (no spaces); for example, 3,7-15,19-13,27


    Controller Configuration

    Published: 2014-08-18