Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds3 snmp trap link-status


    [ no ] path pathChannel ds3 ds3Channel snmp trap link-status

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Enables SNMP link status processing for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version disables SNMP link status processing on an interface.


    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • ds3Channel—Number, in the range 1–3, that identifies the path


    Controller Configuration

    Published: 2014-08-18