Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
path ds3 shutdown
Syntax
[ no ] path pathChannel ds3 ds3Channel shutdown
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Disables a DS3 signal. This command applies to a DS3 over channelized SONET interface. DS3 interfaces are enabled by default. The no version restarts a disabled interface.
Options
- pathChannel—Number, in the range 1–2147483648, that identifies the path
- ds3Channel—Number, in the range 1–3, that identifies the path
Mode
Controller Configuration
