Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds3 mdl string

    Syntax

    path pathChannel ds3 ds3Channel mdl string { eic eicValue | fic ficValue |
    generator genValue | lic licValue | pfi pfiCode | port portValue | unit unitValue }

    no path pathChannel ds3 ds3Channel mdl string { eic | fic | generator | lic | pfi |
    port | unit }

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Allows you to configure an MDL message on a DS3 signal as defined in the ANSI T1.107a-1990 specification. This command applies to a DS3 over channelized SONET interface. The no version restores the default value to the specified MDL message or to all MDL messages.

    Options

    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • ds3Channel—Number, in the range 1–3, that identifies the path
    • eicValue—Equipment identification code; 1–10 characters; default value is the null value
    • ficValue—Frame identification code; 1–10 characters; default value is the null value
    • genValue—Generator number to send in the MDL test signal message; 1–38 characters; default value is the null value
    • licValue—Line identification code; 1–11 characters; default value is the null value
    • pfiCode—Facility identification code to send in the MDL path message; 1–38 characters; default value is the null value
    • portValue—Equipment port number to send in the MDL idle signal message; 1–38 characters; default value is the null value
    • unitValue—Unit identification code; 1–6 characters; default value is the null value

    Mode

    Controller Configuration

    Published: 2014-08-18