Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
path ds3 mdl carrier
Syntax
[ no ] path pathChannel ds3 ds3Channel mdl carrier
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Specifies that a DS3 signal is used in the carrier environment. This command applies to a DS3 over channelized SONET interface. The no version restores the default situation, in which an interface does not operate in the carrier environment.
Options
- pathChannel—Number, in the range 1–2147483648, that identifies the path
- ds3Channel—Number, in the range 1–3, that identifies the path
Mode
Controller Configuration
