Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds3 equipment loopback

    Syntax

    path pathChannel ds3 ds3Channel equipment { customer | network } loopback

    no path pathChannel ds3 ds3Channel equipment

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Enables or disables the router’s ability to be placed in loopback by a remote device connected at the DS3 layer for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version restores the default behavior, which disables the router’s ability to be placed in loopback by a remote device. Using the no version has the same effect as issuing the command with the network keyword.

    Options

    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • ds3Channel—Number, in the range 1–3, that identifies the path
    • customer—Enables the router to start loopback testing when it receives an appropriate signal from the remote interface
    • network—Disables the router’s ability to start loopback testing when it receives an appropriate signal from the remote interface; this is the default behavior

    Mode

    Controller Configuration

    Published: 2014-08-18