Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds3 clock source


    path pathChannel ds3 ds3Channel clock source { line | internal
    { module | chassis } }

    no path pathChannel ds3 ds3Channel clock source

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Configures the transmit clock source for a DS3 signal. This command applies to a DS3 over channelized SONET interface. The no version restores the default value.


    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • ds3Channel—Number, in the range 1–3, that identifies the path
    • line—Interface transmits data from a clock recovered from the line’s receive data stream
    • internal—Interface transmits data using its internal clock. You must specify one of the following for internal clocking:
      • module—Internal clock is from the line module itself
      • chassis—Internal clock is from the configured system clock


    Controller Configuration

    Published: 2014-08-18