Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds1 fdl

    Syntax

    path pathChannel ds1 tributaryIdentifier fdl { ansi | att | all | none }

    no path pathChannel ds1 tributaryIdentifier fdl [ ansi | att | all ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Specifies the FDL standard for a DS1 signal when DS1 is configured over a channelized SONET or SDH interface. The no version restores the default, none.

    Options

    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • tributaryIdentifier—Specifier for the tributary in the format
      pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
      • pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
      • tributaryGroup—Number, in the range 1–7, that identifies the group within the path
      • tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12
    • ansi—Specifies ANSI T1.403 Standard for extended superframe FDL exchange support
    • att—Specifies AT&T Technical Reference 54016 for extended superframe FDL exchange support
    • all—Specifies both the AT&T and ANSI mode for extended superframe FDL exchange support
    • none—Removes the current FDL mode settings

    Mode

    Controller Configuration

    Published: 2014-08-18