Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds1|e1 snmp trap link-status

    Syntax

    [ no ] path pathChannel { ds1 | e1 } tributaryIdentifier snmp trap link-status

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Enables SNMP link status processing for DS1 or E1 over channelized SONET and SDH interfaces. The no version disables SNMP link status processing.

    Options

    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • tributaryIdentifier—Specifier for the tributary in the format
      pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
      • pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
      • tributaryGroup—Number, in the range 1–7, that identifies the group within the path
      • tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12

    Mode

    Controller Configuration

    Published: 2014-08-18