Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    path ds1|e1 channel-group snmp trap link-status


    [ no ] path pathChannel { ds1 | e1 } tributaryIdentifier
    channel-group channelGroupNumber snmp trap link-status

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Enables SNMP link status processing on a DS1 or an E1 channel group of channelized SONET and SDH interfaces. The no version disables SNMP link status processing on a DS1 or an E1 channel group.


    • pathChannel—Number, in the range 1–2147483648, that identifies the path
    • tributaryIdentifier—Specifier for the tributary in the format
      pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
      • pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
      • tributaryGroup—Number, in the range 1–7, that identifies the group within the path
      • tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12
    • channelGroupNumber—Either a fractional T1 interface in the range 1–24 or a fractional E1 interface in the range 1–31


    Controller Configuration

    Published: 2014-08-18