Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
path ds1|e1 channel-group description
Syntax
path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description name
no path pathChannel { ds1 | e1 } tributaryIdentifier
channel-group channelGroupNumber description
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Assigns a text description or an alias to a DS1 (T1) or an E1 channel group for channelized SONET and SDH interfaces. Use the show controllers sonet command to display the text description. The no version removes the description or alias.
Options
- pathChannel—Number, in the range 1–2147483648, that identifies the path
- tributaryIdentifier—Specifier
for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber- pathPayload—Payload number for the path; value is 1 for SONET and in the range 1–3 for SDH
- tributaryGroup—Number, in the range 1–7, that identifies the group within the path
- tributaryNumber—Number of the tributary within the tributary group; the value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range 1–3 if the tributary type is tu12
- channelGroupNumber—Either a fractional T1 interface in the range 1–24 or a fractional E1 interface in the range 1–31
- name—Text string or alias of up to 80 characters for the DS1 or E1 channel group for channelized SONET and SDH interfaces
Mode
Controller Configuration