Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    ospf log-adjacency-changes

    Syntax

    [ no ] ospf log-adjacency-changes
    [ severity { severityValue | severityNumber } ] [ verbosity verbosityLevel ]

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Configures the router to send a system log message when the state of an OSPFv2 neighbor changes. For OSPFv3 neighbors, use the log-adjacency-changes command. The no version turns off this feature.

    Options

    • severity—Minimum severity of the log messages displayed for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
      • emergency or 0—System unusable
      • alert or 1—Immediate action needed
      • critical or 2—Critical condition exists
      • error or 3—Error condition
      • warning or 4—Warning condition
      • notice or 5—Normal but significant condition
      • info or 6—Informational message
      • debug or 7—Debug message
    • verbosityLevel—Specifies the verbosity of the log category’s messages; can be any of the following:
      • low—Terse
      • medium—Moderate detail
      • high—Verbose

    Mode

    Router Configuration

     

    Related Documentation

     

    Published: 2014-08-18