Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    ospf bandwidth


    [ no ] ospf bandwidth

    Release Information

    Command introduced in JunosE Release 10.3.0.


    Directs the router to use the bandwidth configured on an OSPF interface for OSPF interface cost calculation. If you configure the bandwidth and then issue the no ospf bandwidth command, the router ignores the cost that is calculated using the configured bandwidth. The no version disables the use of the bandwidth for OSPF interface cost calculation.


    Router Configuration


    Related Documentation


    Published: 2014-08-18