Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    ntp access-group

    Syntax

    ntp access-group { peer | serve-only | serve | query-only } accessListName

    no ntp access-group { peer | serve-only | serve | query-only }

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Specifies the type of broadcasts that the router will accept and respond to, and specifies the servers from which the router will accept broadcasts. The no version enables the router to receive all NTP broadcasts on interfaces configured to receive broadcasts.

    Note: The router can accept, but does not use, NTP control queries.

    Options

    • peer—Enables the router to receive time requests, receive NTP control queries, and synchronize itself to the servers specified on the access list
    • serve-only—Enables the router to receive time requests and NTP control queries from servers specified on the access list, but not to synchronize itself to the specified servers
    • serve—Enables the router only to receive time requests from the servers specified on the access list
    • query-only—Enables the router only to receive NTP control queries from the servers specified on the access list
    • accessListName—Name of the access list

    Mode

    Global Configuration

     

    Related Documentation

     

    Published: 2014-08-18