Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
nsf t2
Syntax
[ no ] nsf t2 { level-1 | level-2 } [ seconds ]
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Specifies the maximum amount of time, in seconds, that an IS-IS restarting router waits for the LSP database to synchronize. You must configure separate instances of the T2 timer for each IS-IS level at which the router operates. The no version restores the default T2 wait time, 100 seconds.
Options
- level-1—Sets the T2 wait time independently for level 1 routing
- level-2—Sets the T2 wait time independently for level 2 routing
- seconds—Maximum wait time, in the range 5–600 seconds, for LSP database synchronization; default value is 100 seconds
Mode
Router Configuration
