Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
neighbor send-label
Syntax
[ no ] neighbor { ipAddress | ipv6Address | peerGroupName } send-label
Release Information
Command introduced before JunosE Release
7.1.0.
ipv6Address variable added
in JunosE Release 8.0.0.
Description
Configures a neighbor to distribute an MPLS label with its IPv4 and IPv6 route advertisements. This command enables BGP to dynamically negotiate SAFI 1 and SAFI 4 with this neighbor. In Router Configuration mode, the command has the same effect as if it were issued in the context of the IPv4 unicast address family. The no version removes the configuration.
Options
- ipAddress—IP address of BGP neighbor
- ipv6Address—IPv6 address of BGP neighbor
- peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command. You cannot override the characteristic for a specific member of the peer group.
Mode
Address Family Configuration, Router Configuration
