Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    neighbor prefix-tree

    Syntax

    neighbor { ipAddress | ipv6Address | peerGroupName }
    prefix-tree prefixTreeName { in | out }

    no neighbor { ipAddress | ipv6Address | peerGroupName }
    prefix-tree [ prefixTreeName ] { in | out }

    Release Information

    Command introduced before JunosE Release 7.1.0.
    ipv6Address variable added in JunosE Release 8.0.0.

    Description

    Assigns an inbound or outbound prefix tree. The no version removes the prefix tree.

    Options

    • ipAddress—IP address of BGP neighbor
    • ipv6Address—IPv6 address of BGP neighbor; valid only under the IPv4 address family for advertising IPv4 routes over BGP IPv6 peers
    • peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
    • prefixTreeName—Name of a BGP prefix tree
    • in—Assigns prefix tree to incoming routes (inbound policy)
    • out—Assigns prefix tree to outgoing routes (outbound policy); you cannot configure a member of a peer group to override the inherited peer group characteristic for outbound policy

    Mode

    Address Family Configuration, Router Configuration

    Published: 2014-08-18