Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    neighbor graceful-restart stalepaths-time

    Syntax

    neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
    stalepaths-time seconds

    no neighbor { ipAddress | ipv6Address | peerGroupName } graceful-restart
    stalepaths-time [ seconds ]

    Release Information

    Command introduced before JunosE Release 7.1.0.
    ipv6Address variable added in JunosE Release 8.0.0.

    Description

    For a peer or peer group, sets the time period after a peer session restart during which BGP waits for an End-of-RIB marker from the peer before flushing all stale routes from that peer. The period is measured from when the session is detected in a down state. The no version restores the default value, 360 seconds.

    Options

    • ipAddress—IP address of BGP neighbor
    • ipv6Address—IPv6 address of BGP neighbor
    • peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
    • seconds—Integer in the range 1–3600; default value is 360 seconds

    Mode

    Address Family Configuration, Router Configuration

    Published: 2014-08-18