ndraprefix
Syntax
ndraprefix startIpv6Prefix { assignedPrefixLength | endIpv6Prefix }
no ndraprefix startIpv6Prefix [ force ]
Release Information
Command introduced in JunosE Release 13.0.0.
Description
Specifies the prefix range from which IPv6 prefixes can be assigned to the Neighbor Discovery router advertisement client. The no version removes the IPv6 prefix range from the local address pool. You can also forcibly delete an IPv6 prefix range from which prefixes have been allocated.
 | Note: If you attempt to configure a prefix range that overlaps with an existing prefix range in the same pool, an error message is displayed and the configuration fails. Also, an error message is displayed if you try to configure a prefix range that overlaps with a prefix range in another IPv6 local address pool on the same virtual router. Also, an automatic truncation occurs if a higher prefix range is specified. |
Options
- startIpv6Prefix—Starting IPv6 prefix of the range of prefixes to be delegated to requesting routers
- endIpv6Prefix—Ending IPv6 prefix of the range of prefixes to be delegated to requesting routers
- assignedPrefixLength—Length of the IPv6 prefix to be assigned from this range of prefixes to the requesting router
- force—Forcibly deletes the IPv6 prefix range from the local address pool
Mode
IPv6 NdRa Pool Configuration
