Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    mpls traffic-eng flood thresholds

    Syntax

    mpls traffic-eng flood thresholds { up | down } percentage [ percentage ]*

    no mpls traffic-eng flood thresholds { up | down }

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Specifies thresholds for the flooding of the current reservable bandwidth throughout the network. You can configure a set of thresholds for increases or decreases in bandwidth. Flooding is triggered when the reservable bandwidth increases past any up threshold or decreases past any down threshold. The no version restores the following default values:

    • For increases in bandwidth (up changes)—15, 30, 45, 60, 75, 80, 85, 90, 95, 97, 98, 99, 100
    • For decreases in bandwidth (down changes)—100, 99, 98, 97, 96, 95, 90, 85, 80, 75, 60, 45, 30, 15

    Options

    • up—Specifies that an increase in bandwidth past the threshold triggers flooding
    • down—Specifies that a decrease in bandwidth past the threshold triggers flooding
    • percentage—Percentage of reservable bandwidth, a value from 1 to 100 percent for increasing bandwidth and from 0 to 99 percent for decreasing bandwidth
    • *—Indicates that the percentage can be repeated multiple times in a list in the command line

    Mode

    Interface Configuration, Subinterface Configuration

    Published: 2014-08-14