Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    mpls ldp vpls vpls-id

    Syntax

    mpls ldp vpls vplsName vpls-id vplsId

    no mpls ldp vpls vplsName vpls-id

    Release Information

    Command introduced in JunosE Release 8.2.0.

    Description

    Configures the globally unique VPLS identifier of a VPLS instance that uses LDP as the signaling protocol. All VEs that participate in the same VPLS domain must use the same VPLS identifier. The VPLS identifier configured for a VPLS instance must not be the same as the PWid for Martini configurations for Ethernet layer 2 services over MPLS. The no version deletes the VPLS identifier from the VPLS instance.

    The mpls ldp vpls vpls-id command is not valid for a VPLS instance that uses BGP as the signaling protocol. To configure a VPLS instance with BGP signaling, use the bridge vpls rd, bridge vpls route-target, bridge vpls site-name site-id, and bridge vpls site-range commands.

    Options

    Mode

    Global Configuration

     

    Related Documentation

     

    Published: 2014-08-14