Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    mpls ldp session holdtime


    mpls ldp session holdtime holdTime

    no mpls ldp session holdtime

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Configures the LDP session hold time, the period that an LSR maintains a session without receipt of a message from an LDP peer. Each LSR peer sends the session hold time in its initialization message; peers negotiate to use the minimum of the session hold times proposed by the pair of LSRs. This negotiated session hold time is used by the keepalive timer to maintain the session.

    The keepalive timer is reset with the receipt of any session message from the peer. In the absence of other LDP protocol messages are being sent, peers periodically send a keepalive message to maintain the LDP session.

    The LDP session is terminated when the timer expires. The no version restores the default value, 180.


    • holdTime—Number of seconds in the range 15–65535


    Global Configuration

    Published: 2014-08-14