Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All



    [ no ] member-interface interfaceType interfaceSpecifier

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Adds a member interface, also known as a bundle member, to an MLPPP bundle, an MLFR bundle, or an IEEE 802.3ad link aggregation group (LAG) bundle. The no version removes the specified member interface from the bundle.

    Note: You cannot add the member interface to a LAG bundle which is in the not present state.


    • interfaceType—One of the following interface types listed in Interface Types and Specifiers
      • serial (MLFR bundle or MLPPP bundle)
      • pos (MLFR bundle only)
      • fastEthernet (IEEE 802.3ad LAG bundle only)
      • gigabitEthernet (IEEE 802.3ad LAG bundle only)
    • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers


    Interface Configuration, Subinterface Configuration

    Published: 2014-08-14