Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
- Understanding CE Load Balancing for Martini Layer 2 Transport
- Configuration of Many Shim Interfaces with the Same Peer, VC Type, and VC ID
- Example: Configuring Many Shim Interfaces with the Same Peer, VC Type, and VC ID
- Load-Balancing Group Configuration
- MPLS Interfaces and Labels
- Configuring Load-Balancing Groups
member interface
Syntax
[ no ] member interface interfaceType interfaceSpecifier
Release Information
Command introduced before JunosE Release 7.1.0.
Description
Adds a member VLAN or S-VLAN subinterface to a Martini layer 2 circuit associated with a load-balancing group. This command creates an MPLS shim interface and associates it with the group. The no version removes the member subinterface from the circuit. Repeat as needed to remove all member subinterfaces used by a load-balanced circuit, thereby deleting the circuit from the group.
Options
- interfaceType—One of the following
interface types listed in Interface Types and Specifiers
- serial
- pos
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
Mode
L2 Transport Load-Balancing-Circuit Configuration
Related Documentation
- Understanding CE Load Balancing for Martini Layer 2 Transport
- Configuration of Many Shim Interfaces with the Same Peer, VC Type, and VC ID
- Example: Configuring Many Shim Interfaces with the Same Peer, VC Type, and VC ID
- Load-Balancing Group Configuration
- MPLS Interfaces and Labels
- Configuring Load-Balancing Groups