Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    mdl transmit

    Syntax

    [ no ] mdl transmit { path-id | idle-signal | test signal }

    no mdl transmit

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Transmits an MDL message from a T3 interface. The no version disables transmission of the specified MDL message or all MDL messages.

    Options

    • path-id—Transmits a path identification message every second; default value is disabled
    • idle-signal—Transmits an idle signal message every second; default value is disabled
    • test-signal—Transmits a test signal message every second; default value is disabled

    Mode

    Controller Configuration

     
     

    Published: 2014-08-14