Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    maximum routes

    Syntax

    maximum routes limit { warningThreshold | warning-only }

    no maximum routes

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Sets a warning threshold and maximum limit for routes imported by a PE router into a VRF from associated CE routers. The no version removes the limit and warning threshold.

    Options

    • limit—Number in the range 1–4294967295 that when exceeded prevents routes from being imported into the routing table; when first exceeded generates a limit-exceeded log entry; if the route count fluctuates below and up to this value, an interval of five minutes must pass before another limit-exceeded log entry can be generated
    • warningThreshold—Percentage in the range 1–100 that when first exceeded generates a warning-threshold-exceeded log entry; if the route count fluctuates around this value, an interval of five minutes must pass before another warning-threshold-exceeded log entry can be generated
    • warning-only—Causes the limit to function as a warningThreshold; specifies that exceeding the limit generates a warning-threshold-exceeded log entry instead of a limit-exceeded log entry and permits routes exceeding the limit to be added to the routing table; if the route count fluctuates around the limit, an interval of five minutes must pass before another warning-threshold-exceeded log entry can be generated

    Mode

    VRF Configuration

    Published: 2014-08-14