Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    match ip address


    match ip address { accessListName [ accessListName ]* |
    prefix-list prefixListName [ prefixListName ]* | prefix-tree treeName [ treeName ]* }

    no match ip address [ accessListName ]* | prefix-list [ prefixListName ]* |
    prefix-tree [ treeName ]*

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Matches any routes that have a destination network number address that is permitted by a standard or extended access list, a prefix list, or a prefix tree, or performs policy routing on packets. You cannot mix references in the same match command; you can only specify either access list(s), prefix list(s), or prefix tree(s). The no version removes the match clause from a route map unless you specify a value, in which case only that value is removed from the match clause.


    • accessListName—String of up to 32 alphanumeric characters
    • prefixListName—Name of a single prefix list; string of up to 32 characters
    • treeName—Name of a single prefix tree; string of up to 32 characters
    • *—Indicates that one or more parameters can be repeated multiple times in a list in the command line


    Policy List Configuration, Route Map Configuration

    Published: 2014-08-20