Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    l2vpn route-target

    Syntax

    [ no ] l2vpn l2VpnName route-target { import | export | both } extendedCommunity

    Release Information

    Command introduced in JunosE Release 8.1.0.

    Description

    Creates or adds to a list of VPWS L2VPN extended communities that the router uses to determine which routes are imported by the specified VPWS L2VPN instance. The no version removes a route target from the specified list.

    Options

    • l2VpnName—Name of the VPWS instance
    • import—Adds the route target to the import list for the specified VPWS instance; the VPWS accepts only routes that have at least one route target that matches a route target in the import list
    • export—Adds the route target to the export list for the specified VPWS instance; all routes advertised from this VPWS are associated with the route targets in the export list; at least one route target in the export list must match a route target in the import list of a VPWS L2VPN receiving the route for the route to be accepted by the VPWS L2VPN.
    • both—Adds the route target to both the import list and export list for the specified VPWS instance; recommended setting for a VPWS instance
    • extendedCommunity—Two-part number of the format number1:number2 that identifies an extended community of VPWS L2VPNs where:
      • number1—AS number or an IP address
      • number2—Unique integer; 32 bits if number1 is an AS number; 16 bits if number1 is an IP address

    Mode

    Global Configuration

     

    Related Documentation

     

    Published: 2014-08-14