Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    l2tp rx-connect-speed-upstream-rate

    Syntax

    [no] l2tp rx-connect-speed-upstream-rate

    Release Information

    Command introduced in JunosE Release 13.2.0.

    Description

    Generates the receive (RX) connect speed AVP [38] when the L2C RAM actual upstream rate is sent from AAA to L2TP. The value 0 is sent in the RX Connect-Speed AVP when the L2C is not configured. The no version restores the default behavior, which disables the generation of the RX Connect-Speed AVP which has the L2C RAM actual upstream rate.

    Note: The actual upstream rate takes precedence over the configured ATM1483 or VLAN advisory RX speed which takes precedence over the RX Connect-Speed AVP that is generated when RX and transmit-connect speeds are equal.

    Mode

    Global Configuration

    Published: 2014-08-14