Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    l2tp ignore-receive-data-sequencing

    Syntax

    [ no ] l2tp ignore-receive-data-sequencing

    Release Information

    Command introduced before JunosE Release 7.1.0.

    Description

    Suppresses sequence number checking for data packets received on all L2TP tunnels in the router. This setting affects only packets received on a tunnel, not packets sent on a tunnel. The L2TP LAC still inserts sequence numbers into data packets if the LAC receives packets from the LNS that contain sequence numbers. The no version restores the default, which causes the router to check the sequence numbers in data packets that it receives on L2TP tunnels.

    Note: If you are using IP reassembly, we recommend that you set up the router to ignore sequence numbers in received data packets. Because IP reassembly may reorder L2TP packets, out-of-order packets may be dropped if sequence numbers are being used on L2TP data packets.

    Mode

    Global Configuration

     

    Related Documentation

     

    Published: 2014-08-20