Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
l2tp failover-resync
Syntax
l2tp failover-resync { failover-protocol | failover-protocol-fallback-to-silent-failover | silent-failover | disable }
no l2tp failover-resync
Release Information
Command introduced in JunosE Release 7.3.0.
Description
Configures the global L2TP peer resynchronization method that an L2TP failed endpoint uses to resynchronize with its peer non-failed endpoint. This setting can be overridden by a peer resynchronization method that is configured by either an L2TP host profile or an AAA domain map tunnel configuration. The no version disables peer resynchronization. The default version restores the default peer resynchronization method, failover-protocol-fallback-to-silent-failover.
Options
- failover-protocol—Specifies the L2TP failover protocol method
- failover-protocol-fallback-to-silent-failover—Specifies the L2TP failover protocol method; however, if the peer does not support this method, the silent failover method is used; this is the default setting
- silent-failover—Specifies the silent failover method
- disable—Disables peer resynchronization
Mode
Global Configuration
