l2tp disable tunnel-hello
Syntax
[ no ] l2tp disable tunnel-hello
Release Information
Command introduced in JunosE Release 14.2.0.
Description
Prevents the E Series router that is acting as an L2TP access concentrator (LAC) or L2TP network server (LNS) from sending a Hello message to the Layer 2 Tunneling Protocol (L2TP) peer. The no version enables the sending of the Hello message, which is the default behavior.
![]() | Note: Execution of the no l2tp disable tunnel-hello command resumes the transmission of Hello messages in the tunnel and results in the termination of the control connection if the L2TP peer did not support the transmission of Hello messages. |
Mode
Global Configuration