Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All



    [ no ] ipv6

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Enables an IPv6 instance on a router that does not already have an explicit IPv6 address. Normally, performing any IPv6 configuration automatically enables IPv6 on the interface. The no version disables IPv6 on the router.

    Note: Disabling IPv6 on the router causes only the IPv6 routing protocol-related configurations to be removed. The previously configured IPv6 policy settings, such as policy lists, classifier lists, and rate-limit profiles, and local address pools for IPv6 subscribers are not removed because these parameters can be configured without configuring an IPv6 license.


    Global Configuration

    Published: 2014-08-14