Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ipv6 sa-validate


    [ no ] ipv6 sa-validate

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Enables source address validation on an IPv6 interface. This feature verifies that a packet has been sent from a valid source address. When a packet arrives on an interface, the router performs a routing table lookup using the source address. The result from the routing table lookup is an interface to which packets destined for that address are routed. This interface must match the interface that the packet arrived on. If it does not match, the router drops the packet. By default, validation of IPv6 source addresses is disabled for the particular interface or profile. The no version disables source address validation.


    Interface Configuration, Profile Configuration

    Published: 2014-08-14