Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    ipv6 ospf priority


    ipv6 ospf [ processId ] priority intfPriority

    no ipv6 ospf [ processId ] priority

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Sets the router priority. Used in determining the designated router for the particular network. This designation applies only to multiaccess networks. Every broadcast and nonbroadcast multiaccess network has a designated router. A higher priority value for an OSPF interface signifies a greater likelihood of that router becoming the designated router. A value of 1 means that the router has the least chance of becoming a designated router. The no version restores the default value.


    • processId—Integer in the range 1–65535
    • intfPriority—Priority value, an 8-bit number in the range 1–255; default value is 1


    Interface Configuration, Subinterface Configuration


    Related Documentation


    Published: 2014-08-14