Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ipv6 nd reachable-time

    Syntax

    ipv6 nd reachable-time { milliseconds | hours minutes seconds }

    no ipv6 nd reachable-time

    Release Information

    Command introduced before JunosE Release 7.1.0.
    Profile Configuration mode added in JunosE Release 9.0.0.

    Description

    Specifies the amount of time that the E Series router can reach a remote IPv6 node after some reachability confirmation event has occurred. The no version restores the default value 0 milliseconds for router advertisements and 3,600,000 milliseconds (1 hour) for Neighbor Discovery activity of the E Series router.

    Options

    • milliseconds—Amount of time, in the range 0–21600000 milliseconds, that the E Series router can reach a remote node after some reachability confirmation event has occurred
    • hours minutes seconds—Amount of time, in the range 0 hours 0 minutes
      0 seconds – 6 hours 0 minutes 0 seconds, that the E Series router can reach a remote node after some reachability confirmation event has occurred; this specification is not supported in Profile Configuration mode

    Mode

    Interface Configuration, Profile Configuration

    Published: 2014-08-14