Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ipv6 dhcpv6-local sscc


    ipv6 dhcpv6-local sscc { enable | disable }

    no ipv6 dhcpv6-local sscc

    Release Information

    Command introduced in JunosE Release 15.1.0.


    Configures a DHCPv6 local server to send a Delegated-IPv6-Prefix with a PPPv6 interface name to an SRC client after delegating the IPv6 prefix to a CPE. The SRC client sends the Delegated-IPv6-Prefix to an SRC server. The no version restores the default condition, where the DHCPv6 local server does not send the Delegated-IPv6-Prefix to the SRC client.


    • Before you issue this command, you must enable the SRC client’s COPS support by using the sscc enable command, the policy and QoS configuration support for IPv6 interfaces by using the sscc protocol ipv6 command, and the DHCPv6 local server by using the service dhcpv6-local command.


    • enable—Enables the DHCPv6 local server to send the Delegated-IPv6-Prefix to the SRC client. When you enable this feature, the DHCPv6 local server sends the already delegated DHCPv6 prefixes to the SRC client.
    • disable—Disables the DHCPv6 local server from sending the Delegated-IPv6-Prefix to the SRC client. When you disable this feature, the SRC client sends DRQ messages for all delegated DHCPv6 prefixes.


    Global Configuration

    Published: 2014-08-20