Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ipv6 dhcpv6-local limit

    Syntax

    ipv6 dhcpv6-local limit { atm | vlan | ethernet | pos | interface interfaceType interfaceSpecifier } value

    no ipv6 dhcpv6-local limit [ atm | vlan | ethernet | pos | interface interfaceType interfaceSpecifier ]

    Release Information

    Command introduced in JunosE Release 13.3.0.

    Description

    Specifies the maximum number of IPv6 prefixes that the DHCPv6 local server can supply to each ATM interface, VLAN, Ethernet subnet, or POS access interface, or to a particular interface or subinterface. The no version restores the default address limit value, 48,000.

    Note:

    • Before you issue this command, you must enable the DHCPv6 local server by using the service dhcpv6-local command.
    • The DHCPv6 local server is not supported over the POS access interface.

    Options

    • atm—Specifies the limit for ATM interfaces
    • vlan—Specifies the limit for VLANs
    • ethernet—Specifies the limit for Ethernet subnets
    • pos—Specifies the limit for POS access interfaces
    • interfaceType—Interface type; see Interface Types and Specifiers
    • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
    • value—Maximum number of IPv6 prefixes that can be supplied. The range for the value is 0–64,000. The default value is 48,000.

    Mode

    Global Configuration

    Published: 2014-08-20