Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ipv6 dhcpv6-local duid-type

    Syntax

    ipv6 dhcpv6-local duid-type duidType

    no ipv6 dhcpv6-local duid-type

    Release Information

    Command introduced in JunosE Release 12.2.0.

    Description

    Specifies the DHCP unique identifier (DUID) type that the DHCPv6 local server running on the router uses in communication with the DHCPv6 client and for verifying the identity of the client. Both the server and the client are identified by a DUID. By default, the DHCPv6 local server uses the Type 2 server DUID in the communication between the delegating router and the requesting router, which is the customer premises equipment (CPE) at the edge of the remote client site that acts as the DHCP client. The no version removes the configured DUID type and the router reverts to the default Type 2 DUID for the client to identify the server.

    Options

    • duidType—DUID type can be either 2 or 3; the default value is 2

      Note: You must enable the DHCPv6 local server using the service dhcpv6-local command before configuring the DUID type. Otherwise, an error message states that the DHCPv6 local server is not configured on the router.

    Mode

    Global Configuration

    Published: 2014-08-20