Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    ip share-interface


    ip share-interface interfaceType interfaceSpecifier

    no ip share-interface

    Release Information

    Command introduced before JunosE Release 7.1.0.


    Specifies the layer 2 interface that an IP interface will share in the current virtual router. The command fails if the layer 2 interface does not yet exist.

    If you issue this command on a shared IP interface, you cannot issue the ip share-nexthop command for the interface. After creating the shared IP interface, you can configure it as you do any other IP interface. The shared interface is operationally up when the layer 2 interface is operationally up and IP is properly configured. You can create operational shared IP interfaces in the absence of a primary IP interface.

    The no version removes the association between the layer 2 interface and the shared IP interface. You can delete shared and primary IP interfaces independently



    Interface Configuration

    Published: 2014-08-20